Thermal-spray wire for existing coating equipment
Specify zinc, zinc-aluminium or aluminium spray wire against the approved coating system and your equipment's feed requirements. Our catalogue contains these wire families for enquiry. We can review the actual composition and supply format; do not choose a material substitution or diameter from a general trade name alone.
Keep the coating specification in control
Provide the required coating material and the document that defines it. Include the equipment model and applicable wire-feed guidance. Treat the proposed wire as one input to that approved system; an attractive material price does not authorize changing the coating composition or operating procedure.
Confirm composition for each candidate
Ask the proposal to state the actual zinc, zinc-aluminium or aluminium identity and available composition evidence. For an alloy wire, the constituent description must match your specification. Purity or composition wording in a catalogue title needs review against the actual offered material and records.
Check diameter against the equipment
State the required wire diameter, accepted tolerance and measurement basis. Review it against the equipment guidance, not a photograph or an ambiguous product field. Any conflict between title and listed dimensions needs a corrected written proposal before sampling, so the trial evaluates the material you intend to order.
Specify spool and payoff details
Include spool dimensions, winding arrangement, package mass and any coil option accepted by the equipment. Clarify the supplied surface condition. A short wire sample can support material review, but a representative package is needed to evaluate unwinding and feeding under your established procedure.
Record feeding and coating trials together
Identify the candidate lot and use the established equipment procedure for evaluation. Retain feeding observations and the coating checks required by your specification. Approval should state the tested composition, diameter and package, so a later delivery cannot rely on a trial of a different wire condition.
Confirm the actual supply and records
Ask us to identify the producer and order responsibility for the proposed spray wire, together with the available material documents. Our steel wire and steel shot focus does not establish every coating-wire production route. Any additional testing or special winding must be confirmed for the actual enquiry.
Preserve clean, identifiable packages
Agree protection for the wire surface and spool during transport. Keep different compositions or diameters clearly separated and connected to the packing list. At receiving, record package damage before loading; contamination or winding disturbance should be reviewed before operators change settings to compensate.
Reference the approved wire on repeat orders
Retain the accepted composition, diameter and package specification with the trial record. Compare the next delivery before release, and review any proposed material or format change. A familiar product name should not replace the specific approval that established compatibility with your coating equipment.
Send the coating and equipment brief
Share the specified coating material, composition basis, equipment model, wire diameter and spool requirements. Add trial quantity, documentation needs and destination. We can review the relevant wire catalogue entries and confirm the actual proposed material, package, records and commercial terms for your existing system.
