Zinc Shot for Blasting and Metal Finishing

Zinc shot and zinc cut wire media for specified blasting and metal-finishing processes. Check each listing for purity, particle diameter and as-cut or conditioned form. Provide the workpiece material, surface requirement and batch quantity so suitability and packing can be confirmed with the quotation.

2.5 mm Zinc Cut Wire Shot Inquiry | 99.995% Purity Blasting and Polishing Requirements

99.995% Pure Zinc Cut-Wire Shot – 1.2–5.0mm Thermal-Spray Requirements

High Purity Zinc Granule Pellets | 2.5mm Shot and Sandblasting Material Specification

Zinc Cut Wire Shot Inquiry | 99.995% Silver Finish 0.6 0.8 1.0 mm Blasting Requirements

RESDA Zinc Cut Wire Shot for Blasting – 0.6–2.5mm Particle Selection

99.99% Zinc Cut Wire Shot and Balls | 0.6–2.5mm Coating and Blasting Requirements

Zinc Shot Inquiry | 0.3 0.4 0.5 0.6 0.8 mm and 99.995% Purity Requirements

Zinc Wire Cut Shot Inquiry | 99.995% Purity for Blasting Polishing Jewelry Requirements

Zinc Shot for Sandblasting and Alloy-Making Requirements – 0.6–2.5mm

High Purity Zinc Cut Wire Shot | 0.6–2.5mm Soft Metal Blasting and Surface Treatment

0.6 mm Zinc Cut Wire Shot Inquiry | As Cut Conditioned Blasting and Polishing Requirements

99.995% Pure Zinc Shot Requests |0.8mm Blasting Polishing Requirement and 0.6mm Actual Choice

1.0mm Zinc Cut Wire Shot for Non-Ferrous Surface-Blasting Requirements

RESDA 1.2mm Zinc Cut Wire Shot – Purity and Alloy-Metal Process Selection

Sort
  • Recommended
  • Newest