S230 0.6mm Cast Steel Shot for Surface Cleaning Inquiries

• type

  blasting media
  customized support

  OEM
• model number

  S230
  usage

  Shot blasting for surface cleaning
• abrasive grain sizes

  0.6mm(0.02in)
  Hardness

  40-50hrc, 40~50 HRC
• Shape

  Round, Round
  Name

  Steel Shot S280
• Brand

  KAITAI
  Chemical Composition

  C, Mn, Si ,S, P
• Density

  Density
  color

  black
• Standard

  SAE J827

S230 0.6mm cast steel shot is presented for shot blasting and surface cleaning. The S230/0.6mm selection is paired with Alloy steel, giving buyers a specific starting designation for a technical inquiry.

Confirm the S230 designation

State S230/0.6mm explicitly when requesting the cast steel abrasive. Ask the supplier to confirm the delivered shot designation and size distribution against your purchase specification before accepting a batch for a controlled cleaning process.

Round shot and the cleaning requirement

The media is described as round and black, with a stated hardness of 40-50HRC. Those characteristics help frame a cleaning trial, but they do not establish a guaranteed service life or a particular surface result without the operating conditions.

• S230/0.6mm is the available specification choice.
• Alloy steel is the material option for this shot.
• Round shape is stated for the abrasive particles.
• Shot blasting for surface cleaning is the intended use.
• OEM support can be discussed around the required shot specification.

Documentation for a controlled media purchase

If SAE J827 is required by your process, request applicable evidence for the supplied cast steel shot instead of assuming compliance from a standard name. Include the required hardness, size acceptance and workpiece finish in the inquiry so that the S230 media can be evaluated on agreed technical terms. For an S230 replenishment order, retain the approved sample specification and the supplier's confirmed designation so that later deliveries can be compared on the same basis.