Round Stainless Steel Shot 2.0mm for Metal Surface Finishing

• type

  blasting media
  customized support

  OEM
• model number

  Round and as-cut
  usage

  shot blasting, polishing, finishing
• abrasive grain sizes

  2.0mm(0.08in)
  Product name

  Premium round stainless steel shot 2.0mm for metal surface
• Other name

  blasting media stainless steel shot
  Shot blasting

  stainless steel, aluminum, zinc,copper
• Size

  0.8mm/1.0mm/1.2mm/1.4mm or custom
  Usage

  polishing, finishing, shot blasting
• Hardness

  41-59HRC(388-509hv)
  Roundness

  G1 G2 G3
• Application

  Abrasive Refractory Industry
  Density

  7.8g/cm3
• Packing

  25kg /bag package 40 bags/ pallet

The 2.0mm stainless steel shot is intended for metal surface shot blasting, polishing and finishing. Its available combination is 2.0mm with Stainless Steel wire, so an inquiry can focus on that defined selection.

A 2.0mm option for finishing trials

Use the 2.0mm selection as the starting point when discussing the required media size. Other sizes can be discussed separately, but they should not be assumed to be selectable configurations of this particular product.

Agree on the particle condition

Round and as-cut descriptions make the supplied particle condition an essential question. Request the required rounding condition and corresponding size specification before using the stainless wire media in a process with a controlled finish requirement.

• 2.0mm is the actual grit selection.
• Stainless Steel wire is the paired material choice.
• Polishing is one of the stated finishing operations.
• Shot blasting is also an intended use.
• Roundness terminology should be matched to an agreed particle specification.

Evaluate the workpiece and hardness together

Stainless steel, aluminum, zinc and copper workpieces are identified for shot-blasting discussions. Ask for the applicable hardness test report and run a representative finishing trial, because suitability and surface appearance depend on the workpiece and operating parameters rather than the 2.0mm size alone. When ordering replacement 2.0mm stainless wire shot, retain the approved particle condition and finishing-trial results as the reference for subsequent supply discussions and batch acceptance.