Hot Dipped Galvanized Iron and Steel Wire | HH-GW01, 1.8–10mm Actual Diameter Choices
-
FunctionBaling WireGalvanized TechniqueHot Dipped Galvanized
-
Surface TreatmentGalvanizedModel NumberHH-GW01
-
Delivery Timewithin 7 daysProcessing ServiceWelding, Bending, Punching, Decoiling, Cutting
-
TypeFlat WireProduct nameGalvanized Steel Wire
-
GradeQ195/Q235/SAE1006/SAE1008/SAE1045/etc.ShapeRound
-
SurfaceHot-dipped or Electro GalvanizedDiameter0.6mm-6mm or Customized
-
LengthCustomized LengthTensile strength900 - 2200Mpa or Customized
-
PackageStandard Seaworth PackingApplicationBuilding Material
-
PAYMENT TERM30%TT Advance + 70% Balance
Hot Dipped Galvanized Iron and Steel Wire | HH-GW01, 1.8–10mm Actual Diameter Choices
HH-GW01 galvanized iron and steel wire is described for baling and building material enquiries. Actual diameter choices are 1.8, 2, 2.5, 3, 5, 8 and 10mm, while the body gives a 0.6–6mm or customized range.
Confirm the selected diameter and wire section because flat wire and round shape are both recorded. Hot dipped and electro galvanized surfaces are listed as alternatives. Q195, Q235, SAE1006, SAE1008 and SAE1045 also require one selected grade and supply condition.
The source tensile strength range is 900–2200MPa or customized; it is not a verified value for every alloy and diameter. Define the required tensile acceptance, coating basis and bending needs before ordering baling wire. Customized length is available as an enquiry field, but no coil arrangement, knot capacity or safe binding load is established.
