Pure Zinc Ball Anode | 40mm Plating Requirement and Combined Diameter Selection
-
warranty1 YearstypeElectroplating
-
customized supportOEMmodel number25mm 30mm 40mm 50mm 100mm
-
usageShot Blastingabrasive grain sizes25-100mm
-
Hardness40-50 HVShapeRound
-
ColorBlackMOQ1 Ton
-
AdvantageHigh Working EfficiencyPackage25kgs/bag
-
StandardGB/T 470-2008Raw materialSteel
-
PurityMin 99.995%SampleSample Provided
-
QualityPremiumFeatureHigh Purity
Pure Zinc Ball Anode | 40mm Plating Requirement and Combined Diameter Selection
Zinc balls are offered with actual Zinc material and a combined specification listing 25, 30, 40, 50 and 100mm. Minimum 99.995% purity and 40–50HV hardness are body entries.
Confirm the requested 40mm diameter and batch chemistry because there is no separate actual 40mm variant. The 7–120 grit label is unitless and should not replace a dimensional record. Agree the supplied surface and purity acceptance.
For plating, provide the bath and inspection requirements. No selected dissolution, coating or consumption test is supplied. Request material and dimensional documents before evaluation; GB/T470-2008 wording needs relevant evidence, and general high-purity labels do not guarantee anode behavior or finish performance under every operating condition.
