Square and Rectangular Steel Hollow Sections

Square and rectangular steel tube for structural fabrication, construction and fencing. Products include ERW hollow sections and hot-dip galvanized finishes, with sizes such as 20x20mm and 25x25mm referenced in the range. Specify outside section dimensions and wall thickness separately, together with grade, finish and cut length.

ERW Square and Rectangular Steel Hollow Sections for Structural Inquiries

100x100mm Galvanized Square Steel Tube Inquiry | Q235 Q355 S355 and Dimension Check

Galvanized Square Steel Pipe – 20×20mm Greenhouse Tube Inquiry, 0.5–6.5mm Wall Range

30x30 Carbon Steel Square Tube, 2.5 mm Wall with Galvanized Surface

Cold Formed ERW Mechanical Tubing Inquiry | Carbon Alloy Steel Square Section Requirements

Galvanized Steel Square Tube with A36 S235JR EN 10210 and BS1387 References

100x100 MS Galvanized Steel Square Pipe – Section and Coating Requirements

Q700 Galvanized Square Tube Requirements, 20x20 and 25x25 mm Sections

Carbon Steel Square Hollow Tube, Custom Length and 0.4–16 mm Wall

Q700 Hot Dip Galvanized Square Tube, 20x20 and 25x25 mm Requirements

Q700 Galvanized Square Tube Inquiry –20×20/25×25mm and Actual Wall/Length Pairings

Q700 Galvanized Square Tube Inquiry –20×20/25×25mm Sections and6m6.4m12m Lengths

Square Hollow Carbon Steel Pipe | ASTM Hot Rolled Oil Gas and Custom Length Requirements Inquiry

20x20 25x25mm Hot Dip Galvanized Square Tube | Rectangular Section and Finish Selection

Q235 Galvanized Square Steel Tube – 100 × 100mm Section Requirement

Galvanized Square Rectangular Steel Tube | 20x20mm 25x25mm Wall Grade and Strength Inquiry

Hot Dip Galvanized Square Steel Tube, 20x20 and 25x25 mm Requirements

Carbon Steel Square Pipe | Custom Length Bending Cutting and Section Requirements Inquiry

Black Carbon Steel Square Pipe Inquiry | ASTM Oil Service and Custom Fabrication Requirements

Galvanized Square Tube –20×20/25×25mm Inquiry and Actual0.15–6.5mm Wall/Length Pairs

«123»
Trier
  • Recommandé
  • Plus récent