0.3–2.5mm Steel Cut Wire Shot |Cylindrical or Round Particle Confirmation for Blasting Media
-
warranty1 Yearstypeblasting media
-
customized supportOEMmodel number0.3mm-2.5mm
-
usageShot Blastingabrasive grain sizes7-120
-
Hardness40-50 HRCShapeRound
-
ColorBlackMOQ1 Ton
-
AdvantageHigh Working EfficiencyPackage25kgs/bag
-
StandardSAE J444Bulk Density4.2g/cm3
-
Raw materialSteelDurability2800 Times
-
CertificationMSDSQualitySuperior
0.3–2.5mm Steel Cut Wire Shot |Cylindrical or Round Particle Confirmation for Blasting Media
Steel cut wire shot has an actual 0.3–2.5mm specification with steel material and 7–120 grit entry. The body gives 40–50HRC hardness and 4.2g/cm³ bulk density.
The title says cylindrical while the shape field says round. Confirm as-cut or conditioned form and the exact selected diameter, because the combined size range is not a set of separate validated options. The 7–120 field has no measurement unit.
For blasting or finishing, state substrate, desired surface and machine requirements before trial. Request diameter distribution, hardness and particle-form inspection under the agreed specification. SAE J444 and MSDS labels do not establish process approval, and the cycle-count entry lacks operating conditions. No measured removal rate or guaranteed reuse life is supplied for the proposed media.
