Pure Zinc Ball Anode | 50mm Electroplating Requirement and Material Acceptance
-
warranty1 YearstypeElectroplating
-
customized supportOEMmodel number25mm 30mm 40mm 50mm 100mm
-
usageShot Blastingabrasive grain sizes25-100mm
-
Hardness40-50 HVShapeRound
-
ColorBlackMOQ1 Ton
-
AdvantageHigh Working EfficiencyPackage25kgs/bag
-
StandardGB/T 470-2008Raw materialSteel
-
PurityMin 99.995%SampleSample Provided
-
QualityPremiumFeatureHigh Purity
Pure Zinc Ball Anode | 50mm Electroplating Requirement and Material Acceptance
Zinc balls have actual Zinc material with a single combined 25, 30, 40, 50 and 100mm specification. The body describes round shape, minimum 99.995% purity and 40–50HV hardness.
Select 50mm explicitly in the order and define diameter tolerance and surface acceptance. A combined selector does not establish an individually inspected size. Request the selected batch analysis rather than using the separate unitless grit field as a grading conversion.
For electroplating trials, identify the bath and required process acceptance. No measured dissolution, coating uniformity or verified consumption rate is supplied. Obtain material and dimensional evidence; general standard and purity wording does not establish a validated anode life or guarantee identical behavior across all listed sizes and process conditions.
