RESDA 99.995% Zinc Ball Anode Shot | 25–50mm Galvanizing and Electroplating Requirements
-
warranty1 YearstypeElectroplating
-
customized supportOEMmodel number25mm 30mm 40mm 50mm 100mm
-
usageShot Blastingabrasive grain sizes25-100mm
-
Hardness40-50 HVShapeRound
-
ColorBlackMOQ1 Ton
-
AdvantageHigh Working EfficiencyPackage25kgs/bag
-
StandardGB/T 470-2008Raw materialSteel
-
Durability2800 TimesPurityMin 99.995%
-
SampleSample ProvidedQualityPremium
RESDA 99.995% Zinc Ball Anode Shot | 25–50mm Galvanizing and Electroplating Requirements
Zinc balls are recorded with minimum 99.995% purity and 40–50HV hardness. Actual Zinc material is paired with a combined specification of 25, 30, 40, 50 and 100mm rather than individual diameter options.
Select the required diameter within the title 25–50mm range and agree batch material acceptance. The unitless 7–120 grit field should not be interpreted as a diameter conversion or used in place of the explicit millimeter specification.
For galvanizing or electroplating evaluation, provide process and coating requirements. The source contains no verified dissolution, finish or consumption result. Request chemistry and dimensional inspection documents; GB/T470-2008 and durability wording do not establish a validated anode life or guarantee coating performance for the selected bath.
