Steel Shot for Precision Metal Component Blasting: 0.3-3.0mm Inquiry

• warranty

  3 Years
  type

  blasting media
• customized support

  OEM
  model number

  24-240#
• usage

  Mass finishing polishing
  abrasive grain sizes

  24-240#
• Hardness

  42-53hrc
  Shape

  Round
• C

  0.80-1.20%
  Mn

  0.40-1.20%
• Si

  0.40-1.20%
  P

  <=0.05%
• GP hardness

  42-52HRC
  GL hardness

  53-60HRC
• GH hardness

  60-64HRC
  Package

  25kg/bag*40 Bags /pallet
• Usage

  Sand blasting, polishing, resin bonded
  Color

  Brown

Steel shot for precision metal component blasting should be selected against a defined media and surface-finish specification. For a 0.3-3.0mm requirement, obtain confirmation of the delivered size rather than assuming the full diameter range from the product name.

Translate the inquiry into a delivered size

The actual combinations pair Stainless Steel and 16#-240# with grit choices 36, 46 or 60. Ask for the sizing convention and particle distribution corresponding to the chosen grit before using it as a substitute for a specified millimeter diameter.

Separate hardness classes from one batch

The technical description mentions GP, GL and GH hardness ranges alongside a general hardness value. Request the one applicable hardness class, test method and acceptance limits for the media being supplied rather than assuming all classes describe the same selected shot.

• 36, 46 and 60 are the actual grit choices.
• Stainless Steel is the material selection.
• Round is the stated particle shape.
• Mass finishing polishing is an identified operation.
• OEM inquiries can be based on an agreed media specification.

Protect the precision component requirement

For precision blasting or polishing, define the workpiece material and acceptable final surface before approving a trial. Confirm the supplied alloy composition and particle-size limits together, so the selected steel abrasive can be evaluated against the component drawing and the process acceptance criteria. For repeat precision-component work, keep the approved media size distribution and hardness specification with the trial result so later abrasive deliveries can be checked consistently.