Steel Cut Wire Shot for Blasting and Peening

Steel cut wire shot for industrial blast cleaning and peening, including cylindrical media and products described with G1, G2 or G3 conditioning requirements. Diameter, hardness and conditioning level are separate choices. Check the individual material designation when comparing carbon, alloy and stainless cut-wire products.

Cylindrical Steel Shot S70 S110 S170 S230 S280 S330 S390 S460 for Blasting Cleaning

CW-18 Cylindrical Steel Shot for Shot Blasting and Surface Cleaning

SAE J444 Steel Cut Wire Shot CW-04 to CW-22 Inquiry

Carbon Steel Cut Wire Shot CW0.6–CW2.5 for Cleaning and Peening

Wire Cut Steel Shot and Grit Metal Abrasives for Rust Removal

LM 0.6–2.5mm Steel Cut Wire Shot | Cylindrical and Conditioned Blasting Media Selection

Steel Cut Wire Shot Inquiry | Actual Alloy Selection and Round Conditioning Requirements

1.5mm Steel Cut Wire Shot for Deburring and Workpiece Polishing

1.0mm Steel Cut Wire Shot |G1 G2 G3 Requests, Cylindrical Blasting Media 40–50 HRC

0.3–2.5mm Steel Cut Wire Shot |Cylindrical or Round Particle Confirmation for Blasting Media

1.0mm 1.2mm 1.5mm New Steel Cut Wire Shot |Round Blasting Media 40–50 HRC and Size Selection

1.0mm 1.2mm 1.5mm Cylindrical Steel Cut Wire Shot |40–50 HRC and SAE J444 Size Requests

Rounded Steel Cut-Wire Shot for Blasting Surface Treatment

45#72# Steel Cut-Wire Shot Inquiry –Combined1.0/1.2/1.5mm and Cylinder Geometry

0.8mm1.0mm Steel Cut-Wire Shot –Two Actual Specifications and Cylinder Inspection

RESDA 1.5mm Steel Cut Wire Shot Inquiry | Metal Rust Sand Blasting Cylinder Requirements

45# and 72# Steel Cut Wire Shot Requests |1.2mm Cylindrical Blasting Media,40–50HRC

1.8mm Steel Cut Wire Shot |Cylindrical 40–50HRC Blasting Media and Size Acceptance

2.0mm Steel Cut-Wire Shot –Actual Cylinder Abrasive for Rust-Removal Inquiry

45# Steel Cut Wire Shot Inquiry | 2.0mm Forging Cleaning New Wire Size Requirements

«12»
Sortieren
  • Empfohlen
  • Neueste