-
HardnessFull HardSkin PassYes
-
Surface TreatmentNon-oiledThickness0.5 mm ~ 1.0 mm, 0.6MM-2.5MM
-
TypeSteel CoilAlloy Or NotNon-Alloy
-
ApplicationFor drawing of automobilesCertificateAPI , RoHS, BIS, JIS, ISO 9001
-
Delivery Time8 ~ 14 daysGradecarbon steel, HC340/590DP
-
Oiled or Non-oiledNon-oiledProcessing ServiceWelding, Punching, Cutting, Bending, Annealed
-
StandardAISITolerance±5%, ±1%
-
samplefreeAdvantageLarge stock available, immediate delivery
-
Width90-2000mmHardness For stampingSoft state High strength: Hard state
-
Trade TermFOB, CFR, CIFsurface treatmentBright finish, matte finish, oiled (anti-rust), non-oiled
-
Payment30% deposit is requiredTrade typeFOB, CIF, DDP, etc.
DC03 SPCD Cold Rolled Steel Coil for Automotive Drawing Requirements
Cold rolled steel coil is described with width 90–2000 mm and skin passing. Thickness entries include 0.5–1.0 mm and 0.6–2.5 mm, while the requested range is 0.3–3.5 mm.
Confirm the exact gauge and required DC03 or SPCD material; the separate HC340/590DP grade reference must not be treated as equivalent. Select annealed or full hard condition to match the intended drawing process rather than assuming both conditions share forming behavior.
Define the required dimensional tolerance, since both ±1% and ±5% entries appear. Bright, matte, oiled and non-oiled surfaces require selection. No automotive qualification, draw depth, elongation or mechanical result is established, and the listed thicknesses are not individual actual options or proof of immediate availability.
