Steel Shot for Rust Removal and Descaling Requests | 42–53HRC, 12–20 Mesh and Route Selection
-
warranty3 Yearstypeblasting media
-
customized supportOEM, ODMmodel numberMQ-WS
-
usageblastingabrasive grain sizes12-20mesh
-
Hardness42-53hrcShapeIrregular
-
ApplicationPolishing WorkpiecePackage1ton Jumbo Bag
Steel Shot for Rust Removal and Descaling Requests | 42–53HRC, 12–20 Mesh and Route Selection
Blasting media is described with irregular shape, MQ-WS model and 42–53HRC hardness. Actual selections pair Steel with forging or Casting and numbered grit choices rather than a single selected particle distribution.
The body grain field reads 12–20 mesh. Agree the intended grading method and selected manufacture because the actual grit labels provide no stated conversion to that mesh range. Particle shape should be inspected against the required shot condition.
For rust removal, descaling or polishing, specify workpiece and surface acceptance. No cleaning-rate, reuse-life or measured finish result is supplied. Request material and grading documents before trial; high-hardness title wording does not establish a validated process outcome on every substrate or confirm a particular cleaning grade.
