GL25 Steel Grit for Blasting Requests |40–65HRC, Particle Shape and SAE Size Selection
-
warranty1 Yearstypeblasting media
-
customized supportOEMmodel numberGL25
-
usageShot Blastingabrasive grain sizes7-120
-
Hardness40-65 HRCShapeRound
-
ColorBlackMOQ1 Ton
-
AdvantageHigh Working EfficiencyPackage25kgs/bag
-
StandardSAE J444Bulk Density4.2g/cm3
-
Raw materialSteelDurability2800 Times
-
Brand NameChinaPacking25kg /bag Package
GL25 Steel Grit for Blasting Requests |40–65HRC, Particle Shape and SAE Size Selection
GL25 steel media has an actual GL25 specification with steel material and 7–120 grit entry. The body gives 40–65HRC hardness and 4.2g/cm³ bulk density with round shape.
Confirm delivered particle geometry because grit in the title and round in the parameters do not define one accepted shape. Select the GL25 grading and required hardness, supported by inspection evidence rather than assuming the broad hardness range applies to a specific suffix condition.
For blasting, describe substrate, removal requirement and desired finish with equipment details. No operating pressure, wheel setting or measured cleaning rate is provided. The broad grit value should not be converted into mesh. General efficiency and 2800-times durability entries lack test conditions and do not establish guaranteed consumption or reuse performance.
