Product description
-
CoatingZ181 ~ Z275HardnessFull Hard
-
Spangle TypeZero SpangleThickness0.12-0.8
-
TypeSteel CoilApplicationMaking Pipes, Cutting Sheets, Making Small Tools, Making Corrugated Sheets, Making Container, Making Fences, Container Plate
-
CertificateCE, RoHS, SNI, BIS, Saso, PVOC, SABS, TISI, KS, JIS, Gs, ISO 9001Delivery Timewithin 7 days
-
GradeSGCC/SGHC/CGCC/DX51DLength2000-12000mm or customized
-
Oiled or Non-oiledNon-oiledProcessing ServiceBending, Welding, Decoiling, Cutting, Punching
-
Skin PassYesStandardAISI ASTM DIN GB
-
TechniqueHot Rolled BasedTolerance±1%
-
Product NameHot Dipped Galvanized Steel CoilMaterialSGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Q195-q345
-
MOQ5 TonsPayment term30%TT Advance + 70% Balance
-
SurfaceGalvanized CoatedSampleSample Freely
-
Zinc Coating40-275g/m2PackageSea-worth Package
-
QualityHigh-qualityAdvantageCustomize Service
DX51D DX52D DX53D DX54D Galvalume Aluzinc Coil, AZ150 Z100 Requirements
Coated steel coil has four actual width bands from 900 to 2000 mm and a separate 609–1250 mm specification label. The technical zinc entry is 40–275 g/m².
Confirm coating chemistry for an AZ150 aluzinc or Z100 galvanized requirement rather than treating them as interchangeable. Select the exact DX grade and define the specification label. The accompanying material list mainly identifies DX51D and other galvanized designations.
The thickness entry is 0.12–0.8 without a unit and requires confirmation. Define coil versus 2000–12000 mm cut length supply. Non-oiled, zero spangle and skin passed conditions are described. No numerical hardness, corrosion life or certification is established by full hard wording and general standards references.
