Cold Rolled Steel Coil for Automotive Panel Drawing | DC03 SPCD Grade and Condition Confirmation
-
HardnessFull HardSkin PassYes
-
Surface TreatmentNon-oiledThickness0.5 mm ~ 1.0 mm or customized, 0.6MM-2.5MM or customized
-
TypeSteel CoilAlloy Or NotNon-Alloy
-
ApplicationFor drawing of automobilesCertificateAPI , RoHS, BIS, JIS, ISO 9001
-
Delivery Time8 ~ 14 daysGradecarbon steel, HC340/590DP
-
Oiled or Non-oiledNon-oiledProcessing ServiceWelding, Punching, Cutting, Bending, Annealed
-
StandardAISITolerance±5%, ±1%
-
samplefreeAdvantageLarge stock available, immediate delivery
-
Width90-2000mm or customizedHardness For stampingSoft state High strength: Hard state
-
Trade TermFOB, CFR, CIFsurface treatmentBright finish, matte finish, oiled (anti-rust), non-oiled
-
Payment30% deposit is requiredTrade typeFOB, CIF, DDP, etc.
Cold Rolled Steel Coil for Automotive Panel Drawing | DC03 SPCD Grade and Condition Confirmation
Cold rolled steel coil is listed with customized length and either 700–900mm or customized width. The source mentions automotive drawing, annealing and stamping, alongside bright or matte and oiled or non-oiled surface alternatives.
DC03 and SPCD in the title differ from the HC340/590DP grade entry. Full hard and soft stamping condition also coexist. A panel drawing enquiry must resolve the selected grade and delivery condition before treating this as deep drawing quality. Body thickness ranges of 0.5–1.0mm and 0.6–2.5mm need a single agreed target.
Supply panel geometry, thickness, width and the required surface class when requesting material. Confirm the relevant forming and mechanical documentation for that specification. The record does not demonstrate a drawing limit, automotive approval or a common performance level across the different grades and hardness conditions.
