-
typeOthercustomized supportOEM, ODM
-
model number669usagecleaning, rust removal, strengthening, peening
-
abrasive grain sizesP40-P320Hardness42-53hrc
-
ShapeIrregularProduct nameSteel Shot
-
KeywordSteel shot,Stainless steel shot, steel wire cut shotSizeCustomizable Size
-
Materialstainless steelAppearanceIrregular circle
-
SamplesupportUsageClean rust, sand blast, grind, clean oxide
-
QualityHigh qualityPackageCarton Box
For a 0.8mm round shot-blasting requirement, model 669 stainless steel shot provides a focused media inquiry. Confirm the delivered diameter and particle condition before treating the product as a confirmed round 0.8mm abrasive.
Make the 0.8mm requirement explicit
The selectable grit choices are numeric designations and Other rather than a dedicated 0.8mm selection. Request a size specification showing how the proposed grit corresponds to the required diameter, including acceptable distribution and oversize limits.
Resolve round versus irregular particles
The 669 media is described with an irregular appearance, so a rounded-shot requirement needs specific confirmation. Ask for the supplied particle conditioning and a representative sample before approving the stainless steel media for a shape-sensitive blasting or peening process.
- 669 is the model identifier for this abrasive.
- Stainless Steel is the selectable material.
- Cleaning and rust removal are stated uses.
- Customizable size can be discussed for a defined diameter.
- Sample support can help assess the required particle condition.
Frame the trial around the surface
Describe the workpiece and the required finish when discussing 0.8mm media for sand blasting, grinding or oxide cleaning. Obtain the relevant hardness basis and assess a sample against the intended result so that the final choice addresses both size and shape, not merely the 669 model name. A satisfactory 669 sample should document both the agreed diameter distribution and particle rounding, giving the buyer a clearer reference for any subsequent 0.8mm media inquiry.
