6061 6063 Aluminum Round Seamless Pipe Requests | Mill Finish, Diameter and Wall Selection
-
Grade7000 SeriesTolerance±1%, 1%
-
Model Number7003 7005 7050 7075Al (Min)99.5%
-
Alloy Or NotIs AlloyDelivery Timewithin 7 days
-
Hardness60-150Length1m-12m or as required
-
Processing ServiceBending, Decoiling, Welding, Punching, CuttingShapeRound
-
Surface TreatmentMill FinishedTemperT3~T8
-
UsageconstructionWall Thickness0.8 to 5.0mm or as required
-
KeywordAlumimnum Round PipeApplicationPipe Profile Constructure
-
SizeCustomized Sizes AcceptableCertificationISO9001:2008
-
Payment term30% Deposit+70% BalanceService24 Hours Online
-
PackingStandard Seaworthy PackageMOQ1ton
-
StandardASTM AMS JIS EN GB
6061 6063 Aluminum Round Seamless Pipe Requests | Mill Finish, Diameter and Wall Selection
Aluminum round pipe has an actual 3–250mm outside diameter, below 75mm category and 0.3–50mm wall selection. The body gives 0.8–5.0mm wall,1–12m or requested length and mill finish.
The title 6061/6063 requirements differ from the 7000series grade and 7003/7005/7050/7075 model entries. Choose one documented alloy and temper. Confirm a feasible diameter and wall rather than assuming the broad selector fits every size within the smaller diameter category.
T3–T8 is recorded, while hardness 60–150 lacks a measurement scale or alloy mapping. Specify finished dimensions and required processing. Seamless manufacture and construction performance need evidence for the selected pipe; general standard and application labels do not establish structural capacity or service approval.
