6061 6063 Aluminum Round Seamless Pipe Requests | Mill Finish,3–250mm Diameter and Wall Selection
-
Grade7000 SeriesTolerance±1%, 1%
-
Model Number7003 7005 7050 7075Al (Min)99.5%
-
Alloy Or NotIs AlloyDelivery Timewithin 7 days
-
Hardness60-150Length1m-12m or as required
-
Processing ServiceBending, Decoiling, Welding, Punching, CuttingShapeRound
-
Surface TreatmentMill FinishedTemperT3~T8
-
UsageconstructionWall Thickness0.8 to 5.0mm or as required
-
KeywordAlumimnum Round PipeApplicationPipe Profile Constructure
-
SizeCustomized Sizes AcceptableCertificationISO9001:2008
-
Payment term30% Deposit+70% BalanceService24 Hours Online
-
PackingStandard Seaworthy PackageMOQ1ton
-
StandardASTM AMS JIS EN GB
6061 6063 Aluminum Round Seamless Pipe Requests | Mill Finish,3–250mm Diameter and Wall Selection
Aluminum round pipe has an actual 3–250mm outside diameter, below 75mm category and 0.3–50mm wall selection. The body describes 0.8–5.0mm wall,1–12m length, mill finish and T3–T8 temper.
The title 6061/6063 requirements need agreement against the body 7000series field and 7003/7005/7050/7075 models. Choose one documented alloy and feasible geometry; the broad diameter range does not establish every pairing within the smaller category.
Hardness 60–150 has no stated scale or alloy mapping. Specify the finished drawing and any cutting, bending or welding requirements. Seamless manufacture and construction performance need selected product evidence; the source general standards do not establish structural capacity or universal material behavior across the listed sizes.
