2.5 Inch Galvanized Hollow Square Tube Requests | Structural Carbon Steel Section and Length Choices
-
InvoicingBy Actual WeightOiled or Non-oiledNon-oiled
-
Section ShapeSquareSurface TreatmentGalvanized
-
Tolerance±1%Alloy Or NotNon-Alloy
-
ApplicationFluid Pipe, Boiler Pipe, Drill Pipe, Hydraulic Pipe, Gas Pipe, Oil Pipe, Chemical Fertilizer PipeCertificateAPI , CE, BIS, BSI, KS, JIS
-
Delivery Timewithin 7 daysGradeGalvanized Steel
-
Processing ServiceWelding, Cutting, Punching, Bending, DecoilingSpecial PipeAPI Pipe, EMT Pipe, Thick Wall Pipe, Other
-
StandardASTMTechniqueERW
-
Product nameGalvanized Steel Square TubeSurfaceGalvanized Coating
-
Zinc layer thickness2.5~15μm or customizedLength5.8-12m or customized
-
Outer diameter10x10mm,15x15mm,20x20mm,etc or customizedWall thickness2-10mm or customized
-
ShapeSquare ShapePayment term30%TT Advance + 70% Balance
-
PackageStandard Seaworth PackingDeliveryWithin 7 Days
2.5 Inch Galvanized Hollow Square Tube Requests | Structural Carbon Steel Section and Length Choices
Galvanized ERW square steel tube is listed with actual 6m, 6.4m and 12m lengths and a 0.5–6.0mm wall selection. The body describes 2–10mm wall and a zinc layer of 2.5–15μm or customized.
The title requests a 2.5 inch structural section, but the body gives square examples of 10×10, 15×15 and 20×20mm. Confirm the required outside side dimension, wall and length as a feasible combination. The general galvanized steel grade entry does not identify a precise substrate standard.
For structural fabrication, provide cut tolerances, joint details and coating acceptance on the drawing. Welding, cutting, punching and bending services do not establish a safe structural load. The source also names fluid and boiler applications, but supplies no pressure rating or service qualification; obtain the appropriate section specification and material inspection documents for the selected use.
