S460 S1.4mm High Carbon Cast Spherical Steel Shot for Rust Removal

• type

  spherical steel shot
  model number

  S460/S1.4mm
• usage

  Shot Blasting/ Rust Removal
  abrasive grain sizes

  12, 14, 16
• Hardness

  42-53hrc
  Shape

  Round
• Durability

  2000~2800 times
  Density

  7.4g/cm3
• Bulk Density

  4.4g/cm3
  Microstructure

  Tempered Martensite or Sorbite
• Chemical Composition

  C 0.80%-1.20% Mn 0.35%-1.20% Si ≥0.40% S ≤ 0.05% P≤0.05%
  Standards

  GB/T, SAE, JB/T, ISO, SFSA

S460/S1.4mm high-carbon cast spherical steel shot is offered for shot blasting and rust removal. Confirm the delivered particle specification for your cleaning process.

Identify the actual configuration

The selectable combination is Cast Steel with grit 12-16 and specification S460/S1.4mm. Request the corresponding particle distribution rather than assuming that the grit code and model define an exact diameter tolerance.

• Round is the stated shot shape.
• Cast Steel is the material selection.
• Rust removal is an identified use.

Check the batch metallurgy

The technical description provides composition and tempered-microstructure references. Obtain the applicable batch evidence and hardness test basis if these characteristics form part of your purchase specification.

Set realistic cleaning acceptance

Evaluate S460 media on representative workpieces and define the finish to be accepted. Ask which exact standard and edition apply; a list of standards organizations or a durability count does not establish compliance or guaranteed reuse life.