-
CoatingZ181 ~ Z275HardnessFull Hard
-
Spangle TypeZero SpangleThickness0.5 mm ~ 1.0 mm
-
TypeSteel CoilApplicationMaking Pipes, Cutting Sheets, Making Small Tools, Making Corrugated Sheets, Making Container, Making Fences, Container Plate
-
CertificateCE, RoHS, SNI, BIS, Saso, PVOC, SABS, TISI, KS, JIS, Gs, ISO 9001Delivery Timewithin 7 days
-
GradeSGCC/SGHC/CGCC/DX51DLength2000-12000mm or customized
-
Oiled or Non-oiledSlightly OiledProcessing ServiceBending, Welding, Decoiling, Cutting, Punching
-
Skin PassYesStandardAISI ASTM DIN GB
-
TechniqueHot Rolled BasedTolerance±1%
-
Product NameHot Dipped Galvanized Steel CoilMaterialSGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Q195-q345
-
MOQ5 TonsPayment term30%TT Advance + 70% Balance
-
SurfaceGalvanized CoatedSampleSample Freely
-
Zinc Coating40-275g/m2PackageSea-worth Package
-
QualityHigh-qualityAdvantageCustomize Service
DX51D Aluzinc Galvalume Coil, Z181–Z275 Coating Requirements
Coated steel coil has an actual combined selection labeled specification 609–1250 mm and width 900–1000 mm. Descriptive thickness is 0.5–1 mm.
Specify the exact base grade and clarify the first dimensional label before ordering. Aluzinc or galvalume coating requirements need chemistry confirmation because the product is also described as hot dip galvanized with a zinc quantity of 40–275 g/m². Do not assume the Z181–Z275 code proves the requested coating composition.
For bending or sheet cutting, define the delivered condition, surface and required length; the descriptive length range is 2000–12000 mm or custom. Full hard has no numerical hardness criterion. BIS, JIS, GS, TISI and SASO references require actual documentation and do not establish supplied certification.
