Nonferrous Metallic Shot

Compare zinc, aluminum and copper shot as separate material choices. Specify composition, particle size and condition for the intended finishing or material-use requirement.

Pure Copper Cut Wire Shot for Alloy Making Sandblasting and Polishing

2.5 mm Zinc Cut Wire Shot Inquiry | 99.995% Purity Blasting and Polishing Requirements

99.995% Pure Zinc Cut-Wire Shot – 1.2–5.0mm Thermal-Spray Requirements

High Purity Zinc Granule Pellets | 2.5mm Shot and Sandblasting Material Specification

Zinc Cut Wire Shot Inquiry | 99.995% Silver Finish 0.6 0.8 1.0 mm Blasting Requirements

RESDA Zinc Cut Wire Shot for Blasting – 0.6–2.5mm Particle Selection

99.99% Zinc Cut Wire Shot and Balls | 0.6–2.5mm Coating and Blasting Requirements

Zinc Shot Inquiry | 0.3 0.4 0.5 0.6 0.8 mm and 99.995% Purity Requirements

RESDA Pure Aluminum Shot and Granules |0.6–3mm Requests, Round Blasting Media

Zinc Wire Cut Shot Inquiry | 99.995% Purity for Blasting Polishing Jewelry Requirements

Copper Cut Wire Shot 0.6–2.5mm Cylindrical Media with 99.9 Percent Purity Reference

99.9% Copper Shot for Alloy Making and Blasting –Actual0.2–3mm Cylinder Reference

Aluminum Shot for Non-Ferrous and Precision-Part Blasting –Actual0.6–2.5mm Range

Zinc Shot for Sandblasting and Alloy-Making Requirements – 0.6–2.5mm

High Purity Zinc Cut Wire Shot | 0.6–2.5mm Soft Metal Blasting and Surface Treatment

99.9% Copper Cut Wire Shot Inquiry | 0.2–3mm Cylindrical Blasting Cu Material Requirements

0.6mm High Purity Aluminum Cut Wire Shot | Sandblasting Media and Chemistry Selection

0.6 mm Zinc Cut Wire Shot Inquiry | As Cut Conditioned Blasting and Polishing Requirements

High-Purity Aluminum Cut-Wire Shot – 0.8mm Bright-Blasting Requirement

99.995% Pure Zinc Shot Requests |0.8mm Blasting Polishing Requirement and 0.6mm Actual Choice

«12»
Сортировка
  • Рекомендуемые
  • Новинки