Steel Shot for Foundry Sand Removal and Casting Surface Finishing

• warranty

  3 Years
  customized support

  OEM
• model number

  24-240#
  type

  steel shoot
• Hardness

  High
  Shape

  Round
• Packing material

  Paper
  Thickness

  3mm(0.12in)
• applied machine

  GRINDERS
  C

  0.80-1.20%
• Mn

  0.40-1.20%
  Si

  0.40-1.20%
• P

  <=0.05%
  GP hardness

  42-52HRC
• GL hardness

  53-60HRC
  GH hardness

  60-64HRC
• Package

  25kg/bag*40 Bags /pallet
  Usage

  Sand blasting, polishing, resin bonded

Steel shot is presented for foundry sand removal and casting surface-finishing inquiries. Define the casting material and acceptable cleaned surface before choosing media.

Assess the casting cleanup task

Describe the sand or surface condition to be removed from the casting. A smooth-finish requirement needs a representative trial, since the durability wording does not establish removal rate or surface quality.

• Round is the stated shot form.
• Stainless Steel is the actual material selection.
• Polishing is an identified operation.

Distinguish shot from grit geometry

The title names both shot and grit, but the body describes round particles. Confirm the required geometry and supplied distribution rather than assuming the abrasive will provide an angular-grit cutting action.

Agree the media batch specification

Specify the actual alloy, chosen numeric grit and one applicable GP, GL or GH hardness class. The 16-240# size label does not establish a single diameter, so use the agreed distribution and trial result for future foundry replenishment.