SAE1006 Annealed Black Carbon Steel Wire in 6 Diameters for Mesh and Binding

• Grade

  SAE1006
  Steel Grade

  SAE1006
• Tolerance

  ±1%
  Type

  Drawn Wire
• Alloy Or Not

  Non-Alloy
  Application

  Netting
• Delivery Time

  15-21 days
  Processing Service

  Decoiling, Cutting
• Special Use

  Cold Heading Steel
  Standard

  ASTM
• Product name

  soft annealed black wire
  Material

  Q195 Q235 SAE1006 SAE1008
• Usage

  tying wire, wire mesh, welded nets, binding wire
  Tensile strength

  350-550MPA
• wire processing

  drawing
  Heat treatment

  annealing
• Standard coil weight

  1-100kg/roll
  Wire Gauge

  0.5mm~4mm

Annealed wire for mesh and ties

This drawn carbon steel wire is described as soft annealed black wire for netting, mesh and binding use. SAE1006 is the stated grade, with other material alternatives also named. Six diameter choices are available: 1, 1.2, 1.5, 1.8, 2 and 2.5mm. The listed tensile range is 350–550 MPa, and annealing is the named heat treatment.

Confirm SAE1006 material and the selected wire condition against the intended mesh or tying process. Requests for 0.7, 0.8 or 1.6mm need separate size agreement because these are not selectable entries. Specify tolerance, cut length or coil handling as needed. For welded nets, provide the process and acceptance requirements; a wire mesh application label does not establish weld procedure qualification, finished panel strength or suitability for every mesh geometry.