Hot Dipped Zinc Coated Galvanized Steel Plate |Building and Automotive Sheet Width Selection
-
CoatingZ30 ~ Z600HardnessFull Hard
-
Spangle TypeRegular SpangleThicknessCustomized
-
TypeSteel SheetApplicationCutting Sheets, Making Small Tools
-
CertificateAPIDelivery Time8 ~ 14 days
-
GradeCustomizedLengthCustomized
-
Oiled or Non-oiledNon-oiledProcessing ServiceCutting
-
Skin PassYesStandardASTM
-
TechniqueHot Rolled BasedTolerance±1%
-
Product NameGalvanized Steel PlateSurfaceGalvanized Coating
-
KeywordGalvanized Steel Plate/SheetTechnologyHop-dipped
-
PackageStandard Seaworth PackingUsageConstruction
-
Steel GradeASTM A53/A106MOQ1 ton
-
PAYMENT30%TT Advance + 70% TTBalanceTRADE TERMCIF FOB CFR
Hot Dipped Zinc Coated Galvanized Steel Plate |Building and Automotive Sheet Width Selection
Galvanized steel plate is offered with four width bands from 900–1000 through 1501–2000mm and a customized alternative. The source describes customized specification, gauge and length, with regular spangle and a non-oiled surface.
Select the final thickness and coating specification. Z30–Z600 is the source code without an explicit coating mass basis. Skin pass and a hot rolled base are recorded, while the substrate standard remains to be defined for the delivered flat product.
For building or automotive part enquiries, provide dimensions and processing requirements with the required material acceptance. The A53/A106 and general ASTM references do not prove a selected sheet grade or application approval. No coating life, strength result or bending limit is supplied; request product-specific inspection documents before fabrication.
