-
CoatingZ181 ~ Z275HardnessFull Hard
-
Spangle TypeZero SpangleThickness0.12-0.8
-
TypeSteel CoilApplicationMaking Pipes, Cutting Sheets, Making Small Tools, Making Corrugated Sheets, Making Container, Making Fences, Container Plate
-
CertificateCE, RoHS, SNI, BIS, Saso, PVOC, SABS, TISI, KS, JIS, Gs, ISO 9001Delivery Timewithin 7 days
-
GradeSGCC/SGHC/CGCC/DX51DLength2000-12000mm or customized
-
Oiled or Non-oiledNon-oiledProcessing ServiceBending, Welding, Decoiling, Cutting, Punching
-
Skin PassYesStandardAISI ASTM DIN GB
-
TechniqueHot Rolled BasedTolerance±1%
-
Product NameHot Dipped Galvanized Steel CoilMaterialSGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Q195-q345
-
MOQ5 TonsPayment term30%TT Advance + 70% Balance
-
SurfaceGalvanized CoatedSampleSample Freely
-
Zinc Coating40-275g/m2PackageSea-worth Package
-
QualityHigh-qualityAdvantageCustomize Service
Hot Dip Galvanized GI Coil, 0.21 and 0.5 mm Thickness Requirements
Galvanized steel coil has an actual 900–1000 mm width selection and a separate specification label of 609–1250 mm. Technical zinc coating is described as 40–275 g/m².
Confirm exact 0.21 or 0.5 mm gauge and the dimensional meaning of the specification label. The descriptive thickness entry is 0.12–0.8 without a unit. Choose the required base steel grade and define measured coating acceptance separately from the Z181–Z275 code.
Zero spangle, non-oiled surface and skin passing are described. Specify coil versus 2000–12000 mm cut length supply and the dimensional tolerance required for later forming. Full hard and durable wording do not provide numerical hardness or service life. No verified certificate or finished component performance is supplied by generic manufacturing applications.
