Galvanized Steel Sheet Inquiry | Z121–Z180 0.5–1mm ASTM Construction Coating Requirements
-
CoatingZ10 ~ Z29HardnessFull Hard
-
Spangle TypeRegular SpangleThicknessCustomized
-
TypeSteel SheetApplicationCutting Sheets
-
CertificateAPIDelivery Time8 ~ 14 days
-
GradeGalvanized Steel SheetLengthCustomized
-
Oiled or Non-oiledNon-oiledProcessing ServiceCutting
-
Skin PassYesStandardASTM
-
TechniqueHot Rolled BasedTolerance±1%
-
Product NameGalvanized Steel PlateSurfaceGalvanized Coating
-
KeywordGalvanized Steel Plate/SheetTechnologyHop-dipped
-
PackageStandard Seaworth PackingUsageConstruction
-
Steel GradeASTM A53/A106MOQ1-5 tons
-
PAYMENT30%TT Advance + 70% TTBalanceTRADE TERMCIF FOB CFR
Resolve the actual zinc coating code before specifying galvanized sheet for construction cuts.
Coating conflict
The title names Z121–Z180 while the detail states Z10–Z29. Confirm the delivered code, measurement basis and actual coating evidence rather than treating these ranges as interchangeable or converting either into an unsupported zinc mass.
Thickness and width
The requested 0.5–1 mm thickness differs from the custom thickness entry, and actual width options are bands. Agree one actual thickness, width and custom length with the required cut edges and non-oiled skin pass surface.
- Actual sheet designation
- Selected thickness and tolerance
- Finished width and length
- Zinc code and measurement
- Cut edge and surface inspection
Material evidence
A53/A106 references do not define a verified sheet grade. Request actual material and fabrication records; ASTM and construction labels establish no certified compliance, structural capacity or corrosion lifetime.
