Galvanized Steel Sheet and Coil | Z121–Z180 and 0.5–1.0mm Construction Requirements
-
CoatingZ20 ~ Z275HardnessFull Hard
-
Spangle TypeZero SpangleThickness0.12-0.8
-
TypeSteel CoilApplicationMaking Pipes, Cutting Sheets, Making Small Tools, Making Corrugated Sheets, Making Container, Making Fences, Container Plate
-
CertificateCE, RoHS, SNI, BIS, Saso, PVOC, SABS, TISI, KS, JIS, Gs, ISO 9001Delivery Timewithin 7 days
-
GradeSGCC/SGHC/CGCC/DX51DLength2000-12000mm or customized
-
Oiled or Non-oiledNon-oiledProcessing ServiceBending, Welding, Decoiling, Cutting, Punching
-
Skin PassYesStandardAISI ASTM DIN GB
-
TechniqueHot Rolled BasedTolerance±1%
-
Product NameHot Dipped Galvanized Steel CoilMaterialSGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Q195-q345
-
MOQ1 TonsPayment term30%TT Advance + 70% Balance
-
SurfaceGalvanized CoatedSampleSample Freely
-
Zinc Coating20-275g/m2PackageSea-worth Package
-
QualityHigh-qualityAdvantageCustomize Service
Galvanized Steel Sheet and Coil | Z121–Z180 and 0.5–1.0mm Construction Requirements
Galvanized steel material is listed as coil with a 609–1250mm specification and 900–1000mm width in the actual selection. The body records non-oiled delivery, zero spangle, skin pass and 2000–12000mm or custom length.
The title requests sheet supply, 0.5–1.0mm thickness and Z121–Z180 coating. The body instead gives unitless 0.12–0.8 thickness and technical zinc coating of 20–275g/m². Agree the target gauge, coating and coil versus cut-sheet form.
The specification entry needs its dimensional role defined. Select one substrate grade and the appropriate material standard. Full hard and construction wording do not establish bending capability or structural performance; request the applicable dimensional and coating inspection requirements before defining a fabricated sheet order.
