DX51D Z120 Galvanized Steel Coil Requests |0.3mm Thickness, Width Selection and Fabrication
-
CoatingZ181 ~ Z275HardnessFull Hard
-
Spangle TypeMinimum SpangleThickness0.21 mm ~ 0.50 mm, 0.14-0.8mm or customized
-
TypeSteel CoilApplicationMaking Pipes, Cutting Sheets, Making Small Tools, Making Corrugated Sheets, Making Fences
-
CertificateAPI , CE, BIS, JIS, Gs, ISO 9001Delivery Timewithin 7 days
-
GradeGalvanized Steel CoilLengthcustomized
-
Oiled or Non-oiledNon-oiledProcessing ServiceWelding, Punching, Cutting, Bending, Decoiling
-
Skin PassYesStandardASTM
-
TechniqueCold Rolled BasedTolerance±1%
-
Product NameGalvanized Steel CoilShapeFlat Coil
-
SurfaceGalvanized CoatedTechnologyCold Rolled Hot Dipped
-
MaterialASTM/AISI/SGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Q195-q345MOQ3 Ton
-
Payment term30%TT Advance + 70% BalanceDelivery timewithin 7 days
-
PackageStandard Seaworth Packing
DX51D Z120 Galvanized Steel Coil Requests |0.3mm Thickness, Width Selection and Fabrication
Galvanized coil has actual width bands of 900–1000,1001–1250,1251–1500 and 1501–2000mm plus customized, with customized length. Minimum spangle, non-oiled delivery, skin pass and cold rolled hot-dipped technology are recorded.
The title 0.3mm gauge falls within the body 0.21–0.50mm and 0.14–0.8mm or custom ranges but is not a separate actual thickness choice. Confirm DX51D and the Z120 requirement against body Z181–Z275 notation with an agreed measurement basis.
For fabrication, specify selected gauge, coating, width and coil or cut-sheet form. Full hard wording supplies no strength value or forming limit. Request grade-specific material and dimensional and coating inspection documents rather than assuming all catalogue grades or coatings share performance.
