DC03 SPCD Cold Rolled Coil Inquiry | 0.3–3.5mm Drawing Quality Automotive Sheet Requirements
-
HardnessFull HardSkin PassYes
-
Surface TreatmentNon-oiledThickness0.5 mm ~ 1.0 mm, 0.6MM-2.5MM or customized
-
TypeSteel CoilAlloy Or NotNon-Alloy
-
ApplicationFor drawing of automobilesCertificateAPI , RoHS, BIS, JIS, ISO 9001
-
Delivery Time8 ~ 14 daysGradecarbon steel, HC340/590DP
-
Oiled or Non-oiledNon-oiledProcessing ServiceWelding, Punching, Cutting, Bending, Annealed
-
StandardAISITolerance±5%, ±1%
-
samplefreeAdvantageLarge stock available, immediate delivery
-
Width90-2000mm or customizedHardness For stampingSoft state High strength: Hard state
-
Trade TermFOB, CFR, CIFsurface treatmentBright finish, matte finish, oiled (anti-rust), non-oiled
-
Payment30% deposit is requiredTrade typeFOB, CIF, DDP, etc.
Specify the actual material condition and delivery form before accepting a drawing sheet order.
Grade and hardness
The title requests DC03 or SPCD, but the detailed grade names HC340/590DP with both full hard and soft stamping wording. Agree actual designation and condition with forming test requirements rather than inferring drawing quality.
Length and width
The actual length choices are 6 m or customized, combined with several width ranges. Confirm coil versus cut sheet supply and actual thickness, since the detailed thickness scope differs from the title.
- Actual standard and designation
- Delivery condition and forming tests
- Thickness and usable width
- Supply form and cut length
- Surface and oiling acceptance
Automotive acceptance
Bright, matte, oiled and non-oiled conditions are described. Select the actual surface and inspection; stock and automotive wording does not verify immediate supply, measured drawability or qualification for a finished vehicle component.
