6061 7075 5052 5083 3003 2024 Aluminum Pipe Requests | Small and Large Diameter Selection
Generate QR code
Product description
-
Grade1000/2000/3000/5000/6000/7000 SeriesTolerance±1%, 1%
-
Model Number7003 7005 7050 7075Al (Min)99.5%
-
Alloy Or NotIs AlloyDelivery Timewithin 7 days
-
Hardness60-150Length1m-12m or as required
-
Processing ServiceBending, Decoiling, Welding, Punching, CuttingShapeRound
-
Surface TreatmentMill FinishedTemperT3~T8
-
UsageconstructionWall Thickness0.8 to 5.0mm or as required
-
KeywordAlumimnum Round PipeApplicationPipe Profile Constructure
-
SizeCustomized Sizes AcceptableCertificationISO9001:2008
-
Payment term30% Deposit+70% BalanceService24 Hours Online
-
PackingStandard Seaworthy PackageMOQ1 ton
-
StandardASTM AMS JIS EN GB
6061 7075 5052 5083 3003 2024 Aluminum Pipe Requests | Small and Large Diameter Selection
Aluminum round pipe has an actual combined selection of 3–250mm outside diameter, below-75mm diameter category and 0.3–50mm wall. The body instead gives 0.8–5.0mm wall and 1–12m or requested length.
Confirm a feasible diameter and wall because the broad range crosses the smaller category. The title alloy requests differ from the 7003/7005/7050/7075 model field; select one documented alloy and temper rather than assuming all listed series share properties.
Mill finish and T3–T8 are recorded. Hardness 60–150 has no stated scale or alloy mapping. Specify cut length and any bending or welding requirements. ASTM and other general standards do not establish structural capacity or universal compliance for every listed pipe configuration.
