-
warranty3 Yearstypeblasting media
-
customized supportOEM, ODM, OBMmodel number304 stainless steel cut wire shot
-
usageshotblasting; sandblastingabrasive grain sizes0.1mm~1.4mm(0in~0.06in)
-
Product name304 stainless steel cut wire shotCertificateISO
-
ShapeTruncated/irregularly globoseHardnessHRC40-50
-
Chemical CompositionC,Si,Mn,Cr,S,PDensity7.00 g/cm3
-
Durability27000~28000 timesPackingPaper bag, wooden case, pallet, ton bag
-
TypeCW12-47Rounded levelAS-Cut,G1,G2,G3
304 stainless steel shot media is available for a size-focused blasting enquiry, including requests covering 0.1mm–1.4mm. Establish whether you require atomized media or cut wire shot before choosing a CW option, because manufacturing form is a separate selection condition.
- 304 and 430 stainless steel are distinct specifications within the CW media selection.
- CW labels include 0.3mm and 1.4mm endpoints, with 0.1mm requiring a separate enquiry.
- AS-Cut, G1, G2 and G3 terms support a precise conditioning-level discussion.
- An atomized-media requirement needs confirmation before a CW-labelled choice is approved.
- Agree the hardness requirement for the selected alloy and conditioning level.
Match a CW diameter to the request
The actual CW menu includes 0.3mm, 0.6mm, 0.7mm, 0.8mm, 1.0mm, 1.2mm and 1.4mm labels. A fine-size request such as 0.1mm needs separate confirmation; the broad range in the product name does not mean every intermediate diameter is selectable.
Distinguish 304 from the 430 alternative
The specification menu offers 304 stainless steel and 430 stainless steel with each available CW choice. Select the alloy deliberately and request the relevant composition requirements, rather than assuming a 430 option has the same material characteristics as the requested 304 shot.
Confirm atomized or conditioned cut wire form
Cut wire terminology, truncated or irregularly globose shape and AS-Cut, G1, G2 and G3 conditioning descriptions require attention when matching the particle form. An atomized-shot requirement should be checked directly with the supplier before approving a CW-labelled selection.
For this 304 media enquiry, state the required manufacturing form, alloy, diameter and conditioning level together. Confirm the applicable hardness and any required certification with the proposed supply documents, then evaluate the selected shot against your blasting or sandblasting process.
