1.0mm 1.2mm 1.5mm Cylindrical Steel Cut Wire Shot |40–50 HRC and SAE J444 Size Requests
-
warranty1 Yearstypeblasting media
-
customized supportOEMmodel number1.0mm 1.2mm 1.5mm
-
usageShot Blastingabrasive grain sizes7-120
-
Hardness40-50 HRCShapeCylinder
-
ColorBlackMOQ1 Ton
-
AdvantageHigh Working EfficiencyPackage25kgs/bag
-
StandardSAE J444Bulk Density4.2g/cm3
-
Raw materialSteelDurability4000 Times
-
Warranty1yearCertificationMSDS
1.0mm 1.2mm 1.5mm Cylindrical Steel Cut Wire Shot |40–50 HRC and SAE J444 Size Requests
Cylindrical steel cut wire shot has an actual combined 1.0mm/1.2mm/1.5mm specification with steel material and 7–120 grit. Recorded hardness is 40–50HRC, with 4.2g/cm³ bulk density.
Choose one diameter and define the required length and particle-shape acceptance for the cylinder. The actual combined entry is not a measured distribution or conditioning-grade record. The 7–120 field has no explicit unit and should not replace the millimetre requirement.
For blasting trials, provide equipment, substrate and target surface finish. Request selected-product sizing and hardness documentation under the applicable specification. MSDS and SAE J444 references do not verify process performance; the 4000-times durability entry lacks test conditions. No guaranteed operating life or peening result is established for the proposed cut wire.
