Welded Punched Galvanized Angle Steel | Construction Hot Dip Section and Hole Pattern Selection
Générer un code QR
Product description
-
CoatingZ41 ~ Z60HardnessFull Hard
-
Spangle TypeRegular SpangleThickness0.21 mm ~ 0.50 mm
-
TypeSteel SheetApplicationMaking Fences, Making Container, Making Corrugated Sheets, Making Small Tools, Cutting Sheets, Making Pipes
-
CertificateCE, API , BIS, Gs, ISO 9001, JISDelivery Timewithin 7 days
-
GradeGalvanizingLength5-12m or customized
-
Oiled or Non-oiledNon-oiledSkin PassYes
-
StandardASTMTechniqueHot Rolled Based
-
Tolerance±1%Product NameGalvanized Angle Steel
-
SurfaceGalvanized CoatedColorCustomized Color
-
MaterialASTM/AISI/SGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Q195-q345KeywordGalvanzied Sheet
-
TechnologyCold Rolled Hot DippedPackageStandard Seaworth Packing
-
MOQ3 TonPayment term30%TT Advance + 70% Balance
-
Delivery timewithin 7 days
Welded Punched Galvanized Angle Steel | Construction Hot Dip Section and Hole Pattern Selection
Welded and punched angle steel is identified by the original construction title with hot-dip galvanizing requirements. Define the required angle section and fabrication drawing for the selected supply.
Specify leg sizes, thickness, length, hole layout and any weld details rather than deriving angle dimensions from sheet-style source widths. Other retained length descriptions do not determine the finished cut component. Obtain material, section and coating inspection, plus relevant fabrication evidence for the intended order. Durable and high-standard wording supplies no structural capacity or corrosion-life value. The title does not establish a validated weld procedure or project approval for every punched configuration.
