Q195 Hot Dip Galvanized Binding Wire, 0.29–3 mm and 350–550 N/mm² Requirements
-
GradeGalvanized WireSteel Gradecarbon/galvanized
-
Tolerance±1%TypeGalvanized
-
Alloy Or NotIs AlloyApplicationBinding Wire
-
Delivery Time8 ~ 14 daysProcessing ServiceDecoiling, Punching, Welding, Bending
-
StandardASTMsamplefree
-
FunctionBinding WireModel Number8/10/12/14/etc
-
Zinc coatingCan be CustomizedAdvantageFast delivery, Large inventory
-
PaymentTT,LC,ETCTestProvide
-
TechnologyHot Rolled,Cold RolledCertificateCE,ISO,MTC,ETC
-
Package StandardSeaworthy Packing or as required
Q195 Hot Dip Galvanized Binding Wire, 0.29–3 mm and 350–550 N/mm² Requirements
Galvanized binding wire is described with customizable zinc coating and no actual diameter selections. The requested specification identifies Q195, diameter 0.29–3 mm and tensile strength 350–550 N/mm².
Confirm the exact grade, measured diameter and tensile acceptance for the selected supplied condition. Define hot dip galvanizing, coil form and coating quantity independently of the broad galvanized or carbon descriptions. An alloy label alone does not establish chemical composition.
For a tie or binding process, specify incoming condition, bend geometry and dimensional tolerance. No numerical elongation or coating life is supplied. ISO9001, CE and MTC references need actual documentation for the batch; naming tests or certificates does not establish passed results, qualified welding or a finished tie working load.
