Hot Rolled Base Galvanized Steel Plate | Z121–Z180 and 0.5–1.0mm Construction Requests
-
CoatingZ20 ~ Z600HardnessFull Hard
-
Spangle TypeRegular SpangleThicknessCustomized
-
TypeSteel SheetApplicationCutting Sheets
-
CertificateAPIDelivery Time8 ~ 14 days
-
GradeGalvanized Steel SheetLengthCustomized
-
Oiled or Non-oiledNon-oiledProcessing ServiceCutting
-
Skin PassYesStandardASTM
-
TechniqueHot Rolled BasedTolerance±1%
-
Product NameGalvanized Steel PlateSurfaceGalvanized Coating
-
KeywordGalvanized Steel Plate/SheetTechnologyHop-dipped
-
PackageStandard Seaworth PackingUsageConstruction
-
Steel GradeASTM A53/A106MOQ1 tons
-
PAYMENT30%TT Advance + 70% TTBalanceTRADE TERMCIF FOB CFR
Hot Rolled Base Galvanized Steel Plate | Z121–Z180 and 0.5–1.0mm Construction Requests
Galvanized steel plate is listed as custom specification and custom width, with regular spangle, non-oiled surface and skin pass. A hot rolled base and sheet cutting service are recorded; finished thickness and length remain to be agreed.
The title targets 0.5–1.0mm thickness and Z121–Z180 coating, whereas the table gives customized thickness and a broader Z20–Z600 notation. Preserve the requested coating code and ask for its units, designation and acceptance limits. No coating life or numeric coating mass can be inferred without that basis.
For construction supply, define the substrate grade, required flat sheet dimensions and coating condition on the order. A53/A106 entries do not verify a flat-product grade. Ask for the appropriate material specification and inspection document; a general ASTM or API label does not establish project compliance.
