Galvanized Binding Wire Low or High Carbon Inquiry | 0.8 1.2 2.1mm Hot Dip Electro Requirements
Générer un code QR
Product description
-
FunctionBinding WireGalvanized TechniqueHot Dipped Galvanized
-
Surface TreatmentGalvanizedModel NumberBinding wire
-
Delivery Time15-21 daysTypeLoop Tie Wire
-
Wire Gaugebwg20 21 22Product name9 gauge 10 gauge galvanized steel iron wire mesh wire
-
MaterialLow Carbon Steel Q195Diameter0.25-5.0mm
-
PackingPlastic Film Inside then outside hessian clothZinc coating8-25g/m2
-
Coil weight0.2kg - 50kg/ coilTensile strength30kg-70kg/mm2
-
Elongation10%-25%ApplicationConstruction binding
Resolve the material and coating differences before specifying this galvanized construction binding wire.
Carbon grade and process
The detailed material is low carbon Q195 and the technique is hot dip galvanizing. High carbon and electrical galvanizing wording in the title should be treated as separate requirements needing confirmation.
Diameter availability
Nine choices span 0.4–2.5 mm and include 0.8 and 1.2 mm. The requested 2.1 mm size is absent, while several gauge labels also need a defined conversion.
- Actual carbon steel grade
- Requested measured diameter
- Selected galvanizing process
- Loop and binding geometry
- Inspection unit and method
Coating and tensile evidence
The source gives a zinc coating range and elongation figure but an unclear kg based tensile expression. Request the original force unit and test condition instead of calculating an assumed stress value or predicting corrosion life.
