-
typeblasting mediacustomized supportOEM, ODM, OBM
-
model number0.1mm - 2mmusagecleaning, peening, shot blasting
-
abrasive grain sizes0.2mm, 0.3mm, 0.5mm, 0.7mm, 1.0mm, 1.2mm, 2.0mm, 0.4mm, 0.6mm 0.8mm, 1.4mm1.7mmHardness42-53hrc, 40-50HRC
-
ShapeCylinder, CylinderProduct name0.1mm 0.2mm 0.6mm 304 316l Micro Stainless Abrasive Steel Shot
-
Size0.1-2.0mmChemical compositionC,Mn,Si,S,P, Cr, Ni
-
MOQ1 TonDensity7.8g/cm3
-
Durability7800~9300 TimesPackage25kg/bag*40 Bags /pallet
-
ApplicationShot peening of foundries
304 or 316 stainless steel micro shot enquiries should specify alloy and particle grading together. Requests for 0.1mm, 0.2mm or 0.6mm media need confirmation against the supplied size distribution.
- Stainless Steel is the actual material choice.
- Cylinder is the stated particle form.
- The actual specification label spans 0.1mm-3mm.
- Ten numeric grit labels are selectable.
- Cleaning, peening and shot blasting are named uses.
Confirm 304 or 316 alloy
The description also uses 316L terminology. Request the exact supplied alloy and composition rather than treating 316, 316L and 304 as interchangeable material selections.
Resolve the particle-size boundary
The technical size description ends at 2.0mm, while the option label ends at 3mm. Ask for the actual fine-size and upper-size limits before choosing a grit label.
Match the cylindrical medium to use
For foundry peening or cleaning, specify the workpiece and particle-form requirements. Confirm the applicable hardness and material documents; an ISO label and durability figure do not establish universal process suitability.
