0.7–8mm Q195 Q235 Low Carbon Steel Wire | Hot Dipped Galvanized Cold Drawn Selection
Générer un code QR
Product description
-
CoatingZ10 ~ Z29HardnessHard
-
Spangle TypeRegular SpangleThickness0.2-6mm(0.01-0.24in)
-
TypeSteel CoilModel NumberSAE1006-1080
-
ApplicationMaking Pipes, Cutting Sheets, Making Small Tools, Making Container, Making Fences, Making Corrugated SheetsDelivery Time8 ~ 14 days
-
GradeCarbon SteelLengthCustomizable, As customer's request
-
Oiled or Non-oiledNon-oiledProcessing ServiceWelding, Punching, Cutting, Bending, Decoiling
-
Skin PassYesStandardGB
-
TechniqueCold Rolled BasedTolerance±1%
-
Wire Gauge1 - 50 mmDia tolerance+/-0.3mm
-
ProcessHot rolled, Cold DrawnTechnologyHot roll, cold roll, cold drawn, ect.
-
EdgeMill Edge Slit EdgeCertificationsMTC,ISO9001, BVTUV
-
PaymentT/T,Western Union,Paypal,Apple Pay,Google Pay,D/A,D/P,MoneyGramPrice TermEx-work, FOBCIF, CFR, etc
-
PackingIndustry standard packaging or according to client's requirement
0.7–8mm Q195 Q235 Low Carbon Steel Wire | Hot Dipped Galvanized Cold Drawn Selection
Q195 or Q235 low-carbon steel wire is identified by the original 0.7–8mm title with hot-dipped galvanized and cold-drawn supply references. High-strength wording describes an acceptance requirement.
Select one diameter, steel grade and final wire condition rather than transferring a sheet-coil thickness into wire geometry. Coating, chemistry and dimensional inspection should refer to the actual chosen batch. The broad title range does not establish every size and temper combination. Provide the required tensile and forming acceptance for the intended process and obtain supporting records. No numerical strength class or tested corrosion performance is established solely by the general high-strength description.
