-
typeOthercustomized supportOEM, ODM
-
model number304usagecleaning, rust removal, strengthening, peening
-
abrasive grain sizesP40-P320Hardness42-53hrc
-
ShapeIrregularProduct nameSteel Shot
-
KeywordSteel shot,Stainless steel shot, steel wire cut shotSizeCustomizable Size
-
Materialstainless steelAppearanceIrregular circle
-
SamplesupportUsageClean rust, sand blast, grind, clean oxide
-
QualityHigh qualityPackageCarton Box
SS304 steel shot is offered for grinding, rust removal and oxide cleaning. Confirm the particle size and condition needed for your abrasive process.
Translate the diameter requirement
For a 0.4mm, 0.5mm or 0.8mm inquiry, ask how the required diameter maps to the selected grit. Actual choices are numeric grit codes and Other, not dedicated millimeter selections.
- 304 is the stated shot model.
- Stainless Steel is the material option.
- Irregular circle describes the particle appearance.
Evaluate the cleaning action
Irregular stainless particles should be assessed against the required workpiece finish. Sand blasting, grinding and oxide removal are identified uses, but the finish should be confirmed with a representative sample.
Request the media acceptance basis
Ask for the applicable hardness test and supplied particle distribution for the SS304 shot. For peening or strengthening requirements, establish a separate treatment specification rather than assuming a result from the material name or a quality label.
