Green Silicon Carbide Abrasive | F16–240# Grain Selection, SiC Composition and Grinding Requirements
-
warranty1 yeartypeblasting media
-
customized supportOEM, ODM, OBMmodel numberF 16-240#
-
usageAbrasiveabrasive grain sizesF 16-240#
-
product nameGreen Silicon CarbideModelF 16-240#
-
KeywordApplicationMOQ1 ton
-
SiC≥99.5%F.C≤0.2%
-
Fe2O3≤0.2%Magnet fraction0.12%
-
Specific gravity3.2 g/ cm3Al2PPM
Green Silicon Carbide Abrasive | F16–240# Grain Selection, SiC Composition and Grinding Requirements
Green silicon carbide has an actual F16–240# specification with numbered grit choices from 20 to 170. The source records SiC at least 99.5%, free carbon at most 0.2% and Fe₂O₃ at most 0.2%.
Other body entries include 0.12% magnetic fraction, specific gravity 3.2g/cm³ and an Al field of 2PPM. Confirm the selected grade and test basis rather than interpreting the broad specification as one particle distribution. No grading-system equivalence is supplied.
For grinding media evaluation, define the workpiece and required finish. The catalogue provides no removal-rate, wear-life or validated compatibility result. Request batch chemistry and particle-size evidence before process trials; the product is an abrasive grain selection, without a defined bonded-stone configuration or operating specification.
