DX52D+Z DX53D+Z Galvanized Steel Coil, Z100–Z275 Pipe and Hardware Requirements
-
CoatingZ181 ~ Z275HardnessFull Hard
-
Spangle TypeZero SpangleThickness0.12-0.8
-
TypeGalvanized Steel Coil (GI Coil)ApplicationMaking Pipes, Cutting Sheets, Making Small Tools, Making Corrugated Sheets, Making Container, Making Fences, Container Plate
-
CertificateCE, SNI, BIS, Saso, PVOC, SABS, TISI, KS, JIS, Gs, ISO 9001Delivery Timewithin 7 days
-
GradeSGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z QLength2000-12000mm or customized
-
Oiled or Non-oiledNon-oiledProcessing ServiceBending, Welding, Decoiling, Cutting, Punching
-
Skin PassYesStandardAISI ASTM DIN GB
-
TechniqueHot Rolled BasedTolerance±1%
-
Product NameHot Dipped Galvanized Steel CoilMaterialSGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Q195-q345
-
MOQ5 TonsPayment term30%TT Advance + 70% Balance
-
SurfaceGalvanized CoatedSampleSample Freely
-
Zinc Coating40-275g/m2PackageSea-worth Package
-
QualityHigh-qualityAdvantageCustomize Service
DX52D+Z DX53D+Z Galvanized Steel Coil, Z100–Z275 Pipe and Hardware Requirements
Hot dip galvanized steel coil has an actual width range selection of 900–1000 mm and a separate specification label of 609–1250 mm. The technical zinc coating entry is 40–275 g/m².
Obtain exact DX52D+Z or DX53D+Z material confirmation because the accompanying grade references mainly identify other galvanized steel designations. Define the requested Z100–Z275 coating acceptance and its measurement basis independently of the Z181–Z275 code. The thickness entry 0.12–0.8 has no unit and needs clarification.
For pipe making or hardware forming, provide the required gauge, slit width and incoming condition. Non-oiled, zero spangle and skin passed supply is described. No ductility result, weld qualification or finished hardware capacity is established by full hard wording or general application references.
