65x65x6 Hot Rolled Galvanized Steel Angle, A36 SS400 S235JR Requirements
-
GradeS235JR~S335JR SeriesInvoicingBy Actual Weight
-
StandardAISI, ASTMTolerance±1%
-
TypeEqualModel NumberS235JR S275JR S355JR
-
Alloy Or NotNon-AlloyApplicationthe power industry
-
Delivery Timewithin 7 daysProcessing ServiceBending, Welding, Punching, Decoiling, Cutting
-
Product nameGalvanized Angle SteelKeywordsAngel Steel Bar
-
ShapeEquilateral Angle BarTechniqueHot Rollled
-
Surface treatmentHot Dip GalvanisedMaterialQ195-Q235
-
SurfaceMild Steel PlainLength6m-12m
-
SAMPLESample Freely
65x65x6 Hot Rolled Galvanized Steel Angle, A36 SS400 S235JR Requirements
Hot rolled galvanized angle has an actual 6 m dimension option and a descriptive 6–12 m length range. Equal leg geometry and hot dip galvanizing are described.
Confirm the requested 65x65x6 mm section against a drawing because the option identifies length rather than leg dimensions. Select ASTM A36, SS400 or S235JR material explicitly; other grade and Q195–Q235 references must not be treated as equivalents.
The S335JR family spelling differs from the S355JR model reference and needs confirmation without silent correction. Define the required galvanized versus plain surface and coating acceptance. General power industry application and processing services do not establish a structural capacity, weld qualification or verified material report. Choose equal or unequal geometry explicitly if the requirement differs.
