Z275 DX51D 26 Gauge GI Sheet Metal in Coil Requests |Width Selection and Customized Length
-
CoatingZ181 ~ Z275HardnessFull Hard
-
Spangle TypeRegular SpangleThickness0.21 mm ~ 0.50 mm, 0.14-0.8mm or customized
-
TypeSteel CoilModel NumberHH GI Coil
-
ApplicationMaking Pipes, Cutting Sheets, Making Small Tools, Making Corrugated Sheets, Making FencesCertificateAPI , CE, BIS, JIS, Gs, ISO 9001
-
Delivery Timewithin 7 daysGradeGalvanized Steel
-
LengthcustomizedOiled or Non-oiledNon-oiled
-
Processing ServiceWelding, Punching, Cutting, Bending, DecoilingSkin PassYes
-
StandardASTMTechniqueHot Rolled Based
-
Tolerance±1%Product NameGalvanized Steel Coil
-
ShapeFlat CoilSurfaceGalvanized Coated
-
TechnologyCold Rolled Hot DippedMaterialASTM/AISI/SGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Q195-q345
-
MOQ3 TonPayment term30%TT Advance + 70% Balance
-
Delivery timewithin 7 daysPackageStandard Seaworth Packing
Z275 DX51D 26 Gauge GI Sheet Metal in Coil Requests |Width Selection and Customized Length
HH GI galvanized coil has actual width bands of 900–1000,1001–1250,1251–1500 and 1501–2000mm with customized length. The body describes non-oiled delivery, skin pass and regular spangle.
The title 26gauge needs a defined gauge system and metric thickness. Body thickness ranges are 0.21–0.50mm and 0.14–0.8mm or customized; choose one target. Z181–Z275 coating notation needs an agreed measurement basis and the selected Z275 requirement.
Confirm DX51D substrate and hot or cold rolled base condition because the source contains both descriptions. For coil or cut-sheet fabrication, state dimensions and processing acceptance. Full hard and general standards do not establish bending capability or numerical strength; obtain material, coating and dimensional documentation for the chosen configuration.
