Welded Carbon Hollow Section Galvanized Steel Tube | 12m Length, 3.9mm Wall, Square or Rectangular
-
InvoicingBy Theoretical WeightOiled or Non-oiledNon-oiled
-
Section ShapeSquareSurface TreatmentGalvanized
-
Tolerance±1%Alloy Or NotNon-Alloy
-
ApplicationFluid Pipe, Boiler Pipe, Drill Pipe, Hydraulic Pipe, Gas Pipe, Oil Pipe, Chemical Fertilizer Pipe, Structure Pipe, OtherCertificateAPI , CE, BSI, RoHS, SNI, BIS, Saso, PVOC, SONCAP, SABS, SIRM, TISI, KS, JIS, Gs, ISO 9001
-
Delivery Time8 ~ 14 daysGradeS235JR,S235JO,S235J2,SS330,SPHC, S185,CS Type B
-
Processing ServiceWelding, Punching, Cutting, Bending, DecoilingSpecial PipeAPI Pipe, Other, EMT Pipe, Thick Wall Pipe
-
StandardJISTechniqueSaw
-
Product nameGalvanized Square Steel PipeLength1-12m
-
SurfaceZinc CoatingKeywordGalvanzied Steel Pipe
-
ShapeSquare. Rectangular.RoundMaterialSt52
-
UsageBuilding ConstructionMOQ1 Ton
-
PackingStandard Seaworthy Packing
Welded Carbon Hollow Section Galvanized Steel Tube | 12m Length, 3.9mm Wall, Square or Rectangular
Galvanized carbon steel hollow section has an actual selection of 12m length and 3.9mm wall. The body identifies square section and also lists rectangular and round alternatives with non-oiled zinc-coated surface.
Outside dimensions are missing, so provide the required shape and side lengths on a drawing. St52 is recorded as material alongside S235JR/S235JO/S235J2 and other grade names. These are alternatives needing one agreed designation. The technique entry Saw does not fully define the welded route requested in the title.
For fabrication, specify section tolerances, cut length and coating acceptance. JIS is named without a complete product standard. The fluid, boiler and structural application fields supply neither pressure qualification nor load capacity; request material identification and relevant dimensional inspection evidence.
