-
typeblasting mediacustomized supportOEM, ODM, OBM
-
model number0.10-3mmusagecleaning, peening, shot blasting
-
abrasive grain sizes0.2mm, 0.3mm, 0.5mm, 0.7mm, 1.0mm, 1.2mm, 1.4mm1.7mm, 2.0mm, 0.4mm, 0.6mm 0.8mmHardness42-53hrc, 40-50HRC
-
ShapeCylinder, CylinderProduct nameabrasives.stainless steel shot pellets stainless steel granules
-
Size0.1mm-3.0mmChemical compositionC,Mn,Si,S,P, Cr, Ni
-
MOQ1 TonDensity7.4g/cm3
-
Durability7800~9300 TimesPackage25kg/bag*40 Bags /pallet
-
ApplicationShot peening of foundries
Stainless steel shot is offered for metal surface cleaning and peening with a selectable 0.2–3mm range. Stainless Steel is the material choice, while the exact grade, particle form and hardness need agreement for the supplied abrasive.
Choose the diameter within the range
Several individual diameters are described, but numeric grit labels are the actual selections. Ask for a physical distribution and grading convention rather than assuming a direct grit-to-diameter conversion.
- Stainless Steel is the material choice.
- 0.2–3mm is the selectable range.
- Cleaning and peening are named uses.
- Cylinder form is described in parameters.
- Foundry peening is an application context.
Agree the alloy and particle geometry
SUS430, 410, 316 and 304 are title references rather than separate alloy variants. Confirm the supplied composition and whether cylindrical or round particles are required.
Set a testable peening specification
Resolve the applicable hardness range before a controlled trial. Reuse figures and density wording need relevant test evidence; neither establishes cleaning life or a peening result for the selected medium.
