Soft Electro Galvanized Iron Binding Wire for Grape Trellis | 1mm Requirement
-
FunctionBinding WireGalvanized TechniqueElectro Galvanized
-
Surface TreatmentGalvanizedModel NumberQ195
-
Delivery Time22 ~ 30 daysProcessing ServiceWelding, Bending, Punching, Decoiling
-
TypeLoop Tie WireWire Gauge0.7mm-4.0mm
-
SurfaceZinc CoatedTensile Strength350-550N
-
Colorbright
Specify the binding detail before choosing galvanized wire for a grape trellis.
Trellis binding wire selection
This electro galvanized binding wire listing describes loop tie wire and uses grape trellis as its title application. A 1 mm size is requested in the title, but that diameter is absent from the selectable menu. Confirm it separately rather than substituting another diameter without approval.
Choose wire for the tying detail
A loop tie detail differs from a support strand specification. Describe the tying geometry and verify the actual diameter before comparing proposals.
- Menu choices run from 0.2 to 3 mm.
- Specific choices include 1.65, 1.8, 2 and 2.5 mm.
- The descriptive gauge range is 0.7–4 mm.
- Specify loop geometry and supply length.
- Describe contact points and handling requirements.
Keep load requirements explicit
The source gives a force value in newtons without a clear stress basis, so it is not a tensile strength rating in MPa. Confirm softness and tying behavior for the actual wire. Trellis use does not establish a support load capacity.
