Equal Galvanized Steel Angle Iron | Custom Cutting and Section Dimension Selection
QR-Code generieren
Product description
-
CoatingZ30~Z40HardnessFull Hard
-
Spangle TypeRegular SpangleThickness0.21 mm ~ 0.50 mm(0.01in~0.02in)
-
TypeSteel SheetApplicationMaking Fences, Making Container, Making Corrugated Sheets, Making Small Tools, Cutting Sheets, Making Pipes
-
CertificateCE, API , BIS, Gs, ISO 9001, JISDelivery Timewithin 7 days
-
GradeASTM A36 Q420/Q460Length5-12m or customized
-
Oiled or Non-oiledNon-oiledProcessing ServiceDecoiling, Bending, Cutting, Punching, Welding
-
Skin PassYesStandardASTM
-
TechniqueCold Rolled BasedTolerance±1%
-
Product NameGalvanized Angle SteelSurfaceGalvanized Coated
-
ColorCustomized ColorMaterialASTM/AISI/SGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Q195-q345
-
KeywordGalvanzied SheetTechnologyCold Rolled Hot Dipped
-
PackageStandard Seaworth PackingMOQ3 Ton
-
Payment term30%TT Advance + 70% BalanceDelivery timewithin 7 days
Equal Galvanized Steel Angle Iron | Custom Cutting and Section Dimension Selection
Equal galvanized steel angle iron is identified by the original title with cutting service. Select the required equal-leg section and finished length through the fabrication drawing.
An angle specification should identify both legs, section thickness, material grade and coating acceptance. Sheet-style width fields and conflicting length entries in the preserved source do not establish that geometry and are excluded from the added specification. Request material and dimensional inspection for the selected supply, including the cut-length tolerance where required. Factory wording does not establish a structural load capacity, welding result or tested corrosion interval for the chosen angle.
